cranes

We manufacture different types of cranes to fit the requirement, space, and capacity you need. Our cranes may be manufactured as overhead, gantry, or jib type to able to manage and maneuver your heavy weight materials easily.

40FT WIDE
OVERHEAD CRANE

We can achieve wide spans with our cranes, as we engineer the building from start to finish. Wide span cranes are commonly used in aircraft hangars.

CONFIGURE YOUR BUILDING

Customize your building to suit your needs.

configure

100 TON
Overhead CRANE

Cranes made to suit your load requirements and make your work easier. Heavy capacity cranes are suitable for a factory that requires heavy lifting.

DSI PROJECT CASE STUDIES

Discover more of our uniquely completed projects.

case studies

crane types

DSI delivers several types of crane systems.

> MONOrail cranes

> DOUBLE rail cranes

> GANTRY CRANES

> SEMI-GANTRY CRANES

> JIB CRANES

MONORAIL CRANES

Monorails cranes are a highly versatile lifting device that can have curves, switches, turntables and can even connect to overhead bridge cranes or conveyors. Manufacturers commonly utilize these cranes to relocate materials or products within a restricted location, as opposed to throughout an entire building.

DSI Crane capacity, distance between wheels, length of rails, lifting height, type may be customized according to your need.

DOUBLE RAIL CRANES

Two crane tracks are suspended in parallel for the double rail system with he hoist suspended between them. The loads are distributed more evenly meaning less loading for the building structure.

All DSI cranes are Equipped with an Elec trical panel board, Hook block, pendant push button control unit with safety switch locks pended by flexible cable. Load lifting, Driven by motor-reducer, with special motor coupled to a grooved steel drum with mechanical brake type that is applied automatically if the power fails. Limit switches for upward and downward travels of the hook.4/1 wire cable.2 speeds 4/1 m/min.

GANTRY CRANES

A gantry crane is ideal where runways are not practical to install. Could be place in an our door non-covered area or in a covered area where the building hasn't been designed to take the loads of a crane.

DSI carriage is composed of 2 Driving wheels and 2 loose wheels all made of high grade steel, fitted on bearings.2 Electric Motors with speed reducers and 2 speeds 8/32 m/min.Elastic rubber are fitted at both ends of the casings.Flexible flat cable suspended from a metal track carrier along the length of the bridge with electrical panel contains all contractors. Insulated PVC Track power supply along the length of the rails.

SEMI - GANTRY

DSI Steel girders made of Built up section members fabricated from plates or bar stocks shall have flanges and webs joined on double side of the web by a continuous welding process and shall have minimum yield strength of 50,000 psi and will conform to the physical specification of ASTM A-572. Steel rails which is made of rectangular solid steel section.

JIB CRANES

There are multiple types of jib cranes. If you have a tight space or need to go around a corner DSI Jib cranes will be you solution. Jib cranes may be free standing, wall mounted, or articulating.

DSI PROJECT GALLERY
View a compilation of pictures in our Project Gallery

projects